Get the latest tech news

Not all OCuLink eGPU docks are created equal

I recently tried using the Minisforum DEG1 GPU Dock with a Raspberry Pi 500+, using an M.2 to OCuLink adapter, and this chenyang SFF-8611 Cable. After figuring out there's a power button on the DEG1 (which needs to be turned on), and after fiddling around with the switches on the PCB (hidden under the large metal plate on the bottom; TGX to OFF was the most important setting), I was able to get the Raspberry Pi's PCIe bus to at least tell the graphics card installed in the eGPU dock to spin up its fans and initialize.

After figuring out there's a power button on the DEG1 (which needs to be turned on), and after fiddling around with the switches on the PCB (hidden under the large metal plate on the bottom; TGX to OFF was the most important setting), I was able to get the Raspberry Pi's PCIe bus to at least tell the graphics card installed in the eGPU dock to spin up its fans and initialize. But then I swapped back to my RX 7900 XT, the one that was previously unrecognized in the Miniforum dock... and it still wouldn't work. And they usually eat up an entire afternoon, because I'm always certain it's a PEBKAC, and I usually exhaust every route debugging before I'd waste a vendor or a maintainer's time with a bug report!

Get the Android app