Get the latest tech news
OpenWrt One
is based on the MediaTek Filogic 820 SoC and has WiFi 6, dual-band, 3×3/2×2, 1x 2.5Gbit WAN, 1x 1Gbit LAN, 1GB DDR4 RAM, 256 MiB NAND, 16 MiB NOR, M.2 SSD, USB-C Serial console and USB 2.0. Supported Versions Hardware Highlights Schematics, datasheets and the OpenWRT One Howto can be found at https://one.openwrt.org/hardware/ Installation The device will come with a default OEM Stock Firmware complete with LuCI GUI installed.
Once those files have been copied across, a serial console connection should be immediately opened so that boot menu recovery can be used. This can be done by running a command line that starts GNU Screen after the upload (so firstly make sure you have it installed): This (counterintuitively) happens by having the SPI NOR WP jumper in place (which is the factory default position), and choosing 7.
Or read this on Hacker News